Survive in a high-speed drilling

Survive in a high-speed drilling Fortunately, the floors do not generally occur when driving at high speed. This is probably due to a high speed, was mainly the shoulder of the road, where most of the production of the plane fragments are present. Secondly, when the tire goes at a speed higher than the tip of the objects, is less likely to be crossed by them, compared to a slow moving tire. These are probably the reason why they do not normally have a tire on the tip down. Although rare, but his bicycle tires can go flat at high speeds and it is scary as hell. However, if you are careful and promotes the good fortune to survive it. The key to survival when it is flat, but does not stop immediately. You can hear a hissing sound when the tires apartments. His circle, when it touches the surface causes the audio track. It is no longer a first air input, and when this happens, it takes a long time to prevent. The rear tire plans more often. However, if the front tire flats, does not make the following two things: * Use the front brake to stop. * Tour of the inclined surface. Conversely, do not lead anywhere other than directly in front. Compared to flatten the tire realized, it is safer to ride a flat stitch (tubular) tires. This is due to a type of tire to sew, but flat, will stay with the tire and the road has always been? s glued properly. Then you sew the tire and did not receive one.